{"product_id":"speedybee-nano-2-4ghz-elrs-receiver-sx1280-100mw-tlm-0-7g-10-4x18-4mm-ipex1-wifi-ota-fpv-drones","title":"SpeedyBee Nano 2.4GHz ELRS Receiver — SX1280, 100mW TLM, 0.7g, 10.4×18.4mm, IPEX1, WiFi OTA, for FPV Drones","description":"\u003ch2\u003eSpeedyBee Nano 2.4GHz ELRS Receiver — SX1280 + ESP8285, 100mW Telemetry, 0.7g, 10.4×18.4mm, IPEX1, WiFi OTA Firmware Updates, for FPV Freestyle \u0026amp; Long Range Drones\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSpeedyBee Nano 2.4GHz ELRS Receiver\u003c\/strong\u003e is one of the smallest and lightest ExpressLRS receivers available, weighing just \u003cstrong\u003e0.7g\u003c\/strong\u003e at \u003cstrong\u003e10.4×18.4mm\u003c\/strong\u003e. Built on the proven \u003cstrong\u003eSX1280 + ESP8285\u003c\/strong\u003e chipset, it delivers full ELRS 2.4GHz performance with \u003cstrong\u003e100mW telemetry\u003c\/strong\u003e and support for \u003cstrong\u003eWiFi OTA firmware updates\u003c\/strong\u003e — no USB flasher required. The included T-antenna (54×78mm, 0.6g) provides solid range performance in a lightweight package suited for any 5\" or micro FPV build.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Lightweight\u003c\/strong\u003e — 0.7g receiver body (+ 0.6g T-antenna); negligible weight penalty on any build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Compact\u003c\/strong\u003e — 10.4×18.4mm; fits on any FC with available UART and 5V pad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSX1280 + ESP8285 Chipset\u003c\/strong\u003e — Proven ELRS 2.4GHz silicon with full protocol compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100mW Telemetry Power\u003c\/strong\u003e — Strong return link for reliable RSSI, LQ, and sensor data at range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiFi OTA Firmware Updates\u003c\/strong\u003e — Update firmware wirelessly via the SpeedyBee app or browser; no USB flasher needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPEX1 (U.FL) Antenna Connector\u003c\/strong\u003e — Standard IPEX1 port; compatible with included T-antenna or aftermarket antennas\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5V Input\u003c\/strong\u003e — Powered directly from FC 5V pad; no additional regulation needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull ELRS Compatibility\u003c\/strong\u003e — Works with all 2.4GHz ELRS TX modules; compatible with EdgeTX, OpenTX, and ELRS Configurator\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SpeedyBee Nano 2.4GHz RX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 2.4GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipset:\u003c\/strong\u003e SX1280 + ESP8285\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelemetry Power:\u003c\/strong\u003e 100mW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna Connector:\u003c\/strong\u003e IPEX1 (U.FL)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e T-antenna, 54×78mm, 0.6g (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.7g (receiver only, without antenna)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 10.4 × 18.4mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefault Firmware:\u003c\/strong\u003e SpeedyBee Nano 2.4GHz RX 3.3.1\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eLED Status Indicators\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble red blinking\u003c\/strong\u003e — Binding mode active\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow red blinking\u003c\/strong\u003e — Powered, unlinked (no packets received from TX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid red\u003c\/strong\u003e — Connected and receiving signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast red flashing\u003c\/strong\u003e — WiFi active; OTA update available\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eQuick Reference\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTo enable WiFi: wait 60 seconds after power-on, or long-press the button for 3 seconds\u003c\/li\u003e\n\u003cli\u003eTo enter binding mode: cut power 3 times in quick succession\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat’s in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× SpeedyBee Nano 2.4GHz ELRS Receiver\u003c\/li\u003e\n\u003cli\u003e1× T-Antenna (54×78mm, 0.6g)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerfect For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMicro, 3”, and 5” FPV freestyle builds where weight is critical\u003c\/li\u003e\n\u003cli\u003eLong-range FPV builds requiring a lightweight, reliable ELRS receiver\u003c\/li\u003e\n\u003cli\u003ePilots upgrading to ELRS from legacy receivers wanting the smallest possible footprint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SpeedyBee","offers":[{"title":"Default Title","offer_id":44522199220364,"sku":"1005006739782044-Default Title","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0579\/2019\/2652\/files\/S0ab34c02503a45989c260843ce32b379E.webp?v=1788045091","url":"https:\/\/thedroneflight.com\/products\/speedybee-nano-2-4ghz-elrs-receiver-sx1280-100mw-tlm-0-7g-10-4x18-4mm-ipex1-wifi-ota-fpv-drones","provider":"TheDroneFlight","version":"1.0","type":"link"}