Happymodel Mobula7 V2 75mm Micro FPV Whoop Drone - 1S, Caddx ANT Camera, RS0802 KV20000 Motors, X12 5-IN-1 AIO Flight Controller, 400mW OpenVTX

The Happymodel Mobula7 1S 75mm Micro FPV Whoop Drone, now in its V2 version, is a highly advanced and compact FPV racing drone designed for exceptional performance and reliability. The latest iteration of this popular model features several upgrades, including a new camera and flight controller, making it a top choice for both racing enthusiasts and casual FPV pilots.

Key Features:

Ø  Camera Upgrade: As of May 2024, the Mobula7 V2 comes with a Caddx ANT camera, replacing the discontinued Runcam Nano3. The Caddx ANT offers a high-quality image with enhanced clarity for a better FPV experience.

Ø  Flight Controller: The drone is equipped with the X12 5-IN-1 AIO flight controller, which integrates:

Ø  2.4G ELRS V2.0: For ultra-low latency and robust signal reception.

Ø  OpenVTX: Adjustable video transmission power up to 400mW for a strong and clear video feed.

Ø  12A Blheli_S ESC: For smooth and efficient motor control.

Ø  Betaflight OSD: Provides on-screen display for real-time flight information.

Ø  Motors: Features new RS0802 KV20000 brushless motors with a unibell design, a 1.5mm shaft, and a PCB bottom plate. These motors offer high efficiency, reliability, and superior performance.

Ø  Video Transmitter: Onboard OpenVTX with power settings from 0 to 400mW, including RCE and PIT modes, which are especially useful for racing events and varied environments.

Ø  Propellers: Includes Gemfan 1610-2 bi-blade propellers (4 CW + 4 CCW) designed for balanced thrust and maneuverability.

Specifications:

ü  Frame Size: 75mm

ü  Dimensions: 99mm x 99mm x 40mm

ü  Weight: 24g

ü  Battery Compatibility: 1S LiPo/LIHV (Recommended sizes: 450mAh, 550mAh, 650mAh; batteries not included)

Receiver Options:

ü  2.4G ELRS SPI

ü  SPI FrSky D8/D16 (Note: Not compatible with EMAX E6 radio)

ü  PNP Version (without onboard receiver)

ü  TBS Version (with external TBS CRSF NANO RX)

Package Includes:

ü  Mobula7 1S 75mm Whoop Drone Frame (Mobula7 V4 Frame): 1

ü  Flight Controller Options:

ü  X12 ELRS V1.0 with SPI ELRS 2.4G receiver

ü  X12 FrSky V1.0 with SPI FrSky 2.4G receiver

ü  X12 PNP V1.0 with external TBS CRSF NANO RX

ü  X12 PNP V1.0 without onboard receiver

ü  RS0802 KV20000 Brushless Motors: 4

ü  Gemfan 1610-2 Bi-Blade Propellers (4 CW + 4 CCW): 1 set

ü  Caddx ANT 1200TVL Camera: 1

ü  Onboard 5.8G OpenVTX (0-400mW): 1

ü  1S Parallel Charging Board: 1

ü  Propeller Disassemble Tool: 1

ü  Extra Camera Canopy: 1

Spare Parts Specifications:

Motors:

ü  Model: RS0802 KV20000

ü  Configuration: 9N12P

ü  Stator Diameter: 8mm

ü  Stator Length: 2mm

ü  Shaft Diameter: 1.5mm

ü  Dimensions: 10.5mm x 13.5mm

ü  Weight: 2.0g

ü  Compatible with: 1S LiPo only

Propellers:

ü  Weight: 0.24g each

ü  Material: PC

ü  Pitch: 1 inch

ü  Diameter: 40mm

ü  Center Thickness: 5mm

Flight Controller:

ü  MCU: STM32F411CEU6

ü  Sensor: MPU6000, ICM20689, or BMI270

ü  Power Supply: 1S battery (DC 2.9V-4.35V)

ü  Built-in ESC: 12A per motor

ü  OSD: Betaflight

ü  OpenVTX: 0-400mW adjustable

ü  ELRS Compatibility: Supports ExpressLRS V2.0 and firmware upgrade to support V3.0

Onboard 5.8G OpenVTX:

ü  Channels: 48

ü  Power Options: 0mW, 25mW, 100mW, 400mW

ü  Power Supply: DC 5V

Caddx ANT Camera:

ü  Sensor: 1/3" CMOS

ü  Resolution: 800TVL

ü  Lens: 2.1mm

ü  Min. Illumination: 0.01 Lux

ü  Power: DC 3-5.5V

ü  Dimensions: 14mm x 14mm x 9mm

ü  Weight: 1.2g

The Mobula7 V2 offers cutting-edge features for superior FPV experiences, combining advanced flight control, powerful motors, and high-quality video transmission.