SPECIFICATIONS

Brand Name: FLYWOO

High-concerned Chemical: None

Is Electric: No battery

Material: Foam

Recommend Age: 14+y

For Vehicle Type: Airplanes

Use: Vehicles & Remote Control Toys

Certification: none

Tool Supplies: Gluing

Quantity: 1 pcs

Description:

Flywoo X30 Waterproof Superhydrophobic Invisible Spray creates an effective waterproof coating for electronic modules, meeting nearly all your needs. Positioned to provide daily waterproofing for drones most easily.

Superhydrophobic materials are ideal materials used in electronic products for waterproofing. The superhydrophobic material resembles the surface of a lotus leaf. Due to its unique repellency to water or water vapor, superhydrophobic materials have inherent and natural functions of preventing water, moisture, salt spray, mold, dust, corrosion, short circuit, etc.

With just a simple spray, a highly effective waterproof coating is formed within 1-2 minutes, allowing your electronic products to withstand water splashes and remain usable even on rainy days.

Operating Instructions:

Cleaning: Before the coating operation, make sure to thoroughly remove the dust and oil stains on the substrate surface.

Maintenance or recoating: This product has excellent recoating performance. If re-coating is needed, clean the surface and reapply directly at the corresponding position.

(Note:

1-Allow each layer to dry before applying the next one.

2-To achieve the best waterproof effect, it is recommended to spray repeatedly for 2 - 3 times.

3-Before use, please shake it to maintain the uniformity of the liquid)

4-After spraying, the surface drying time is approximately 2 - 3 minutes. The surface can meet daily use requirements after drying.

5-Don't let your circuit board be immersed in water for long when powered on.

Highlights:

Excellent water resistance

Outstanding anti-short circuit characteristics

Exceptional anti-corrosion properties

Natural self-cleaning feature

Effective heat dissipation

Superb antibacterial performance

Outstanding anti-condensation characteristics

Exceptional anti-frost/icing properties

Transparent and colorless

Application Scope:

●Covering all circuit boards (Flight Controller, Electronic Speed Controller, Video Transmitter, O3, etc.)

●Glass materials such as lenses (Can effectively prevent water droplets from adhering, but it will reduce the permeability by 30%. If dissatisfied after application, it can be wiped clean)

●Plugs on all circuit boards

●Plugs on the battery

Specifications:

Product Name: Flywoo X30 Waterproof Superhydrophobic Invisible Spray

Capacity: 56.7g (For example: Flywoo GOKU F722 PRO Mini V2 20X20 Flight Controller double-sided spray 3 times, need to use 2.5g)

Color: Milky white

Relative density (g/cm³, 25℃) : 1.56 ± 0.3

Water repellency angle：>160°

Material: Superhydrophobic material

Volatility: Non-volatile

Purpose: Used for waterproofing, short-circuit prevention, corrosion resistance, salt spray protection, mold resistance, dust prevention, and heat dissipation in electronic products.

Weight：67.2g

Excellent Water Resistance

Micro-nano structure, making water droplets have nowhere to stay.

Excellent waterproof effect

Excellent anti-corrosion properties

The waterproof performance is outstanding and is not daunted by any environment.

Excellent Facilitation for FPV Pilots to Repair

Flywoo X30 waterproof spray simplifies circuit board repair for FPV pilots compared to traditional three-proof paints with reapplication of protection after component replacement.

Excellent Safety

The Flywoo X30 waterproof spray is an environmentally friendly product that does not contain harmful substances. However, traditional three-proof paints may release volatile organic compounds (VOCs), which have certain impacts on the environment and human health.

Comparison to Traditional Conformal Coatings

The protective performance of the three-proof paint relies largely on the compactness of the coating. This is also the focus of the research and development for three-proof paint manufacturers. Moreover, the super-hydrophobic coating inherently possesses natural characteristics such as waterproofing, anti-short circuit, anti-corrosion, anti-salt spray, anti-mold, and anti-dust. Consequently, superhydrophobic materials are ideal alternatives to conformal coatings! 

The needs of the  electronics industry	superhydrophobic coating	Conformal Coating
waterproof	The biggest feature of superhydrophobic is waterproof	Depends on coating density
Short circuit prevention	Excellent anti-short circuit characteristics due to repellency of water / moisture / corrosive liquids	Depends on coating density
Corrosion protection	Natural repellency of water or corrosive liquids for excellent corrosion protection properties	Depends on coating density
saltfog-proof	Excellent anti-salt spray properties due to natural repellency of salt spray	Depends on coating density
fungi-proof	Hydrophobic and dry surface will not harbor bacteria	Adding anti-mold additives, which will affect the compactness of the coating
dustproof	Self-cleaning effect similar to lotus leaf to prevent dust	No dustproof effect
radiating	Inorganic-organic composite coating to improve heat dissipation	Poor heat dissipation of polymer materials

Excellent Performance Parameters

The super-hydrophobic coating has been tested on the PCB circuit board of Huawei's 5G base station. It has undergone three rounds of tests before and after, and its performance is significantly superior to that of 3M's conformal paint. 

Huawei Case: Super Hydrophobic VS 3M Conformal Coating

Comparison Items	Our Superhydrophobic Coating	3M Conformal Paint
Thickness	~20µm	~40µm
Contact Angle	160°	80°
Wettability (water)	Completely non-wetting	Semi-immersion
Wet and Dry Cycle	No change in contact angle after 1000 times	After 100 times, the contact angle becomes 30°
Salt Spray Performance	1000 h	500h
Adhesion Level	0 level	0
Anti-short Circuit Time (Accelerated Test in a Salt Spray Chamber)	1500h	1000h

Excellent heat dissipation

The thickness of conventional conformal paint is 40 - 120µm, but our super-hydrophobic coating only needs 20 - 50µm.

Resin Type	Acrylic Resin	Epoxy Resin	Silicone Resin	Polyurethane Resin	p-xylene	Our Superhydrophobic Materials
Thermal Conductivity (W/mk)	0.2 - 0.8	0.2 - 1	0.8 - 1.2	0.35 - 1.1	0.2 - 0.5	3.3
Thermal Resistance (10⁻⁴m²K/W)	1 - 4	0.8 - 4	0.6 - 1	0.7 - 2.2	1.6 - 4	0.1

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.