Holybro PM02D Digital Power Module — I2C, XT60, 5.2V/3A, 60A Continuous, LV (2S–6S) or HV (2S–12S), for Pixhawk 5X & 6X
- Free US shipping on orders $100+
- In stock, ready to ship
- Backordered, shipping soon
PayPal Secure Checkout
Tap to check out with PayPal, credit or debit card — no account needed
Save 10% at Checkout
Use code SAVE10 for 10% off your order
- Secure Checkout
- 30-Day Defect/Damage Returns
- Fast & Reliable Shipping
Holybro PM02D Digital Power Module — I2C, XT60, 5.2V/3A Output, 60A Continuous, LV (2S–6S) or HV (2S–12S), for Pixhawk 5X & 6X
The Holybro PM02D is a digital I2C power module designed to provide regulated power to the Pixhawk 5X and Pixhawk 6X flight controllers from LiPo batteries, while simultaneously monitoring battery voltage and current consumption via a digital I2C interface. Available in Low Voltage (LV: 2S–6S) and High Voltage (HV: 2S–12S) versions. Comes fully assembled with XT60 connectors and 14AWG silicone wires, wrapped in shrink tubing for physical protection.
Key Features
- I2C Digital Signal Output — Digital voltage and current monitoring via I2C interface for accurate power data; not compatible with analog PM flight controllers
- 5.2V / 3A Regulated Output — Onboard switching regulator provides stable 5.2V at up to 3A to the flight controller
- 60A Continuous / 100A Burst PCB Rating — Handles high-current enterprise UAV power systems
- LV or HV Variants — LV supports 2S–6S LiPo (max current sensing: 164A); HV supports 2S–12S LiPo (max current sensing: 327A)
- XT60 Connectors + 14AWG Silicone Wire — Rated for 30A continuous / 60A burst; upgrade connector and wire gauge for higher current applications
- Shrink Tubing Protection — Fully assembled and protected for field-ready deployment
- CE Certified — Meets CE compliance standards
Specifications
- LV Input Voltage: 2S–6S LiPo
- HV Input Voltage: 2S–12S LiPo
- Output Voltage: 5.2V regulated
- Output Current: 3A max
- PCB Continuous Current: 60A
- PCB Burst Current: 100A (<60 sec)
- Max Current Sensing — LV: 164A
- Max Current Sensing — HV: 327A
- Interface: I2C digital (voltage & current monitoring)
- Connector: XT60 (battery side), Molex 2.00mm CLIK-Mate 6-pin (FC side)
- Wire: 14AWG silicone (30A continuous / 60A burst)
- Weight: 20g
- Certification: CE
Compatible Flight Controllers
- Holybro Pixhawk 5X
- Holybro Pixhawk 6X / 6X Pro
What’s Included
- 1× PM02D Power Module
- 1× 6-pin 2.00mm pitch cable
Important Notes
- I2C digital output only — NOT compatible with flight controllers that use analog power modules: Pixhawk 6C, Pixhawk 6C Mini, Pixhawk 4, Pixhawk 4 Mini, pix32 v5, or Durandal
-
HV version PX4 setup: Set
SENS_EN_INA228to enabled in PX4 parameters - ArduPilot support: HV version requires ArduPilot 4.4 or later (or latest/master firmware)
- Not designed to power servos — use your ESC/BEC for servo power
- For currents above 30A continuous, upgrade the XT60 plug and wire gauge accordingly
Shipping Policy
Estimated Delivery: Orders typically arrive within 3-7 business days to most locations in North America.
International Shipping: Available with tracking. Transit times vary by destination.
Return & Guarantee Policy
Return Policy: Defective or damaged item? Return it within 30 days for a full refund. Customer pays return shipping.
Technical Support: Need help with compatibility or setup? Contact our FPV experts for free assistance.