Checkout safely using your preferred payment method
Brand Name: NoEnName_Null
Hign-concerned Chemical: None
Is Electric: No battery
Origin: Mainland China
Material: Composite Material
Recommend Age: 14+y
RC Parts & Accs: STACK
For Vehicle Type: Helicopters
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: STACK
Remote Control Peripherals/Devices: ESC
Tool Supplies: Assembly Category
Quantity: 1 pcs
Model Number: GEPRC TAKER F722 BLS V2 STACK
Four-wheel Drive Attributes: STACK
Wheelbase: Screws
Use mainstream STM32F722 chip
Equipped with the latest 42688-P gyroscope
16M black box storage
Integrated LC filter
Upgrade type-C USB interface
Directly plugged into the D JI Air Unit
With TAKER H60_BLS 60A 4IN1 ESC, the flying feel is silky
Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
9V@2.5A + 5V@3A dual independent BEC
GEP-F722-HD v2 Flight Controller
MCU: STM32F722
IMU: ICM42688-P(SPI)
Air Unit Connection:Direct plugging into D JI Air Unit
Black Box: 16M onboard
USB Connector: Type-C
OSD: BetaFlight OSD w/ AT7456E chip
BEC: 5V@3A,9V@2.5A dual BEC
Firmware Target: GEPRCF722
Size: 36.85x36.85mm, hole 30.5x30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
Input Voltage: 3-6S LiPo
UART:5
Power Filter: Integrated LC filter
Weight: 8.1g
Input Voltage: 3-6S Lipo
Galvanometer: Support
Continuous Current: 60A
Burst Current: 65A(5 second)
Support Protocol: Dshot 150/300/600
Size: 42x45.7mm,hole30.5x30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
Weight:14.9g
Target: B_X_30
1 x Flight Controller
1 x ESC
1 x Capacitor
1 x D JI Air Unit Adapter Cable
1 x Flight Controller Adapter Cable
1 x XT60 Power cable
4 x M3*30 Screws
4 x M3*25 Screws
8 x Nylon nuts
8 x Silicone grommets
2 x sh1.0 4pinsilicone cable
1 x Camera connection cable
Uses the mainstream STM32F722 chip
Equipped with the latest 42688-P gyroscope
16M onboard black box storage
Integrated LC filter
Upgraded Type-C USB interface
Directly plugs into the D JI Air Unit
Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC, providing a smooth flying experience
Simple and efficient installation method with shock absorbers for stable gyroscope performance
Dual independent BECs: 9V@2.5A and 5V@3A
GEP-F722-HD v2 Flight Controller
MCU: STM32F722
IMU: ICM42688-P(SPI)
Air Unit Connection:Direct plugging into D JI Air Unit
Black Box: 16M onboard
USB Interface: Type-C
Barometer: supported
OSD: BetaFlight OSD w/ AT7456E chip
BEC: 5V@3A,9V@2.5A dual BEC
Firmware Target: GEPRCF722
Dimension: 36.85x36.85mm, mounting hole size 30.5x30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
Input Voltage: 3-6S LiPo
UART: 5
Power Filter: Integrated LC filter
Weight: 8.1g
Input Voltage: 3-8S Lipo
Ammeter: Supported
Continuous Current:65A
Burst Current:70A(5 seconds)
Support Protocol: Dshot 150/300/600
Dimension:42x45.7mm,mounting hole size30.5x30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
Weight: 14.9g
Firmware Target: B_X_30
1 x FC board
1 x ESC board
1 x Capacitor
1 x D JI Air Unit adapter cable
1 x Flight controller adapter cable
1 x XT60 power cable
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts
8 x Silicone anti-shake pads
2 x sh1.0 4pin silicone cable
1 x Camera connection cable
Use mainstream STM32F722 chip
Equipped with the latest 42688-P gyroscope
16M black box storage
Integrated LC filter
Upgrade type-C USB interface
Directly plugged into the D JI Air Unit
With TAKER H80_BLS 80A 4IN1 ESC, Dual MOS, high current, silky flight
Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
9V@2.5A + 5V@3A dual independent BEC
GEP-F722-HD v2 Flight Controller
MCU:STM32F722
IMU:ICM42688-P(SPI)
Air Unit Connection:Direct plugging into D JI Air Unit
Black Box:16M onboard
USB Interface:Type-C
Barometer: support
OSD:BetaFlight OSD w/ AT7456E chip
BEC:5V@3A,9V@2.5A dual BEC
Firmware Target:GEPRCF722
Size:36.85x36.85mm, hole 30.5x30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
Input Voltage:3-6S LiPo
UART:5
Power Filter:Integrated LC filter
Weight:8.1g
Input Voltage: 3-6S Lipo
Ammeter: Support
Continue Current:80A
Burst Current:85A(5 second)
Support Protocol: Dshot 150/300/600
Size:56.3*61.1mm,hole30.5x30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
Weight: 28.1g
Target: B_X_30
1 x Flight Controller
1 x ESC
1 x Capacitor
1 x D JI Air Unit Adapter Cable
1 x Flight Controller Adapter Cable
1 x XT60 Power cable
4 x M3*30 Screws
4 x M3*25 Screws
8 x Nylon nuts
8 x Silicone grommets
2 x sh1.0 4pinsilicone cable
1 x Camera connection cable
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
GEPRC TAKER F722 BLS 80A 65A 60A V2 STACK BLS 4IN1 ESC 16MB Black Box Data Analyze Record Flight FPV Drone Data Plug Play Racing