Lumenier ELITE PRO 100A V2 6-12S BLHeli_32 4-in-1 ESC X8 Cinelifter FPVDRONE For RC FPV Drone Plane Quadcopter

About this product

The Lumenier ELITE PRO 100A V2 12S BLHeli_32 4-in-1 ESC is a powerful ESC with the latest BLHeli_32 + telemetry and current sensor capable of 100A constant current and up to 12S (52V) input. The CNC aluminum heatsink provides excellent cooling required for high-power setups often required in Cinema and heavy lift drones. The 4-in-1 design simplifies the installation, allowing for 4x ESCs all on one board with a simple plug-and-play cable to connect to your flight controller and BLHeli_32 passthrough for easy programming and firmware updates. If you're looking for maximum power and performance for your drone or aircraft, this is the ESC for you.

• New more robust 16V BEC circuit. Handles voltage spikes without issue!

• Improved heatsink design for optimized cooling and easier mounting

• Supports Dshot300, Dshot600, Dshot1200, MultiShot, OneShot, and normal PPM 1-2us

• The one-sided Mosfet design reduces noise and provides better heat dissipation

• Superb PCB circuit design and 8oz thick copper ensures high-current capability

• Cortex M4 32-bit processor runs with 120M Hz frequency

• High-voltage low resistance 100V, 1.5mΩ Mosfet

• 30.5x30.5m and 86x66mm Mounting Patterns

• Supports High Demag Compensation

• 16V BEC onboard to power flight controller

• 12S High-voltage support (52V)

• Supports Bidirectional + Dshot

• Optimized BLHeli_32 Firmware

• Supports PWM 8-48kHz

HIGH PERFORMANCE CUSTOM HEATSINK

The custom heatsink design provides improved heat dissipation making this ESC a perfect choice for high power needs found in Cinelifters, large drones, and high-performance racing drones. The heatsink effectively cools the ESC allowing for reliable operation even in challenging environments.

BLHELI_32 FIRMWARE AND LIVE TELEMETRY

The Lumenier ELITE PRO 100A 12S BLHeli_32 4-in-1 ESC is a 32-bit ESC running the latest generation BLHeli_32 firmware. The 32-bit architecture enables the ESC to run at incredible speeds resulting in better performance, faster input signals, and lower latency compared to older 8-bit ESCs. This ESC also features a live telemetry connection for more advanced flight controllers, as well as a top-of-the-line current sensor.

HEAVY DUTY COPPER TRACES

One of the biggest features of this ESC is the heavy-duty copper traces (8oz) which can support extreme current. Additionally, the ESC PCB is 2mm thick and layered on a 2nd PCB of 1mm for a total of 3mm. More copper along with the included aluminum heatsink allows you to push more power to your drone.

BENEFITS OF BLHELI_32 FIRMWARE ON 32-BIT ESC

32-bit processors run faster than 8-bit, at which we can expect better performance from the new 32-bit ESCs. Faster input signals with lower latency and higher update rate would be possible, such as Dshot1200 or even faster protocols! (Read about DSHOT) (Read about DSHOT1200)

The 32-bit platform also allows more functionality and features that simply weren't possible on 8bit ESCs, such as:

• Improved direction change in the Bidirectional mode

• Auto-timing for higher efficiency and reliability

• Configuring from FC using DShot commands

• Adjustable “Brake on Stop” force

• Programmable PWM frequency

• Voltage/Current limiting

• RGB LED control

• ESC Telemetry

• Supports: Dshot300, Dshot600, Dshot1200, MultiShot, OneShot, and normal PPM 1-2us.

• Mounting Patterns: 30.5x30.5m / 86x66mm

• Processors: Cortex M4 32-Bit 120Hz

• 16V BEC onboard to power flight controller

• Dimensions: 97mmx72mmx15mm

• Continuous Current: 100A x4 ch

• Peak Current: 120A x4 ch

• Supports: PWM 8-48kHz

• Firmware: BLHeli_32

• Mosfet: 100V, 1.5mΩ

• Voltage: 6-12S

• Weight: 113g

• Download the User Manual here

• Download the latest BLHeli_32 Configurator HERE.

• Download the BLHeli_32 User Manual HERE.

• 1x Lumenier ELITE PRO 100A V2 6-12S BLHeli_32 4-in-1 ESC

• 2x 8pin JST Breakout Cable (short 70mm)

• 2x 8pin JST Breakout Cable (long 120mm)

• 2x 10AWG 200°C Wire - Black / Red 160mm

• 1x 63V 1800uF Capacitor

• 5x M3 Rubber Grommets

• 1x Plastic Hardware set (M3 spacers, screws, nuts)