GEPRC TAKER F722 BL32 Stack 70A Flight Controller Air Unit Connect 3-6S LiPo 9V2.5A 5V3A BEC FPV
- Free US shipping on orders $100+
- In stock, ready to ship
- Backordered, shipping soon
PayPal — Same-Day Processing
Fastest shipping with same-day processing & Buyer Protection. All credit cards accepted at checkout through Shop Pay (installments available).
Save 10% at Checkout
Use code SAVE10 for 10% off your order
- Secure Checkout
- 30-Day Defect/Damage Returns
- Fast & Reliable Shipping
GEPRC TAKER F722 BL32 70A FPV Stack
Build a clean, capable FPV electronics setup with the GEPRC TAKER F722 BL32 70A stack. The full-stack option pairs the GEP-F722-HD V2 flight controller with the TAKER H70_96K 4-in-1 ESC, combining an STM32F722 processor, onboard flight logging and 70A continuous ESC current capability for 3–6S LiPo builds.
Choose Your Configuration
- TAKER H70 96K ESC: ESC-only option.
- F722 BL32 70A STACK: flight controller and ESC stack.
- GEP-F722-HD V2 FC: flight-controller-only option.
The full-stack package contents listed below apply to the stack option, not the individual component options.
Key Features
- STM32F722 processor and ICM42688-P SPI gyroscope for flight control.
- 16M onboard black-box storage for reviewing flight data.
- Direct DJI Air Unit connection simplifies compatible video-system wiring.
- USB-C interface for setup and firmware access.
- Independent 5V/3A and 9V/2.5A BEC outputs for external devices.
- Integrated LC filtering and silicone vibration isolation.
- TAKER H70_96K 4-in-1 ESC with 24–96kHz PWM and DShot 150/300/600 support.
Flight Controller Specifications
- Model: GEP-F722-HD V2.
- MCU: STM32F722; IMU: ICM42688-P (SPI).
- Input: 3–6S LiPo.
- OSD: Betaflight OSD with AT7456E chip.
- Firmware target: GEPRCF722.
- UARTs: 5; black box: 16M onboard.
- BEC: 5V/3A and 9V/2.5A; integrated LC filter.
- USB: Type-C; DJI Air Unit connection: direct plug-in.
- Dimensions: 36.85 × 36.85mm; mounting: 30.5 × 30.5mm.
- Mounting holes: 4mm, reduced to 3mm with silicone grommets.
- Weight: 8.1g.
ESC Specifications
- Model: GEPRC TAKER H70_96K 4-in-1 ESC.
- Input: 3–6S LiPo; current sensing supported.
- Continuous current: 70A; burst: 80A for 5 seconds.
- PWM frequency: 24–96kHz.
- Protocols: DShot 150/300/600.
- Firmware target: GEPRC_G071_4IN1_96K.
- Dimensions: 42.6 × 42.1mm; mounting: 30.5 × 30.5mm.
- Mounting holes: 4mm, reduced to 3mm with silicone grommets.
- Weight: 12.8g.
Perfect For
FPV builders upgrading a compatible 30.5mm-mount frame, replacing flight electronics, or assembling a 3–6S setup with a compatible DJI Air Unit. Choose the complete stack for paired electronics, or select the individual board needed for your build.
Full-Stack Package Contents
- 1 flight controller and 1 ESC.
- 1 capacitor.
- 1 DJI Air Unit adapter cable and 1 flight controller adapter cable.
- 1 XT60 power cable.
- 4 M3 × 30 screws and 4 M3 × 25 screws.
- 8 nylon nuts and 8 silicone grommets.
- 2 SH1.0 4-pin silicone cables.
- 1 camera connection cable.
Installation Notes
No battery is included. Recommended for ages 14+ with appropriate supervision and electronics experience. Check frame clearance, wiring pinouts and video-system compatibility before installation. Disconnect the battery and remove propellers before wiring or bench testing.







Shipping Policy
Estimated Delivery: Orders ship within 24–48 hours with full end-to-end tracking. Transit times typically take under 13 days (6–12 business days) to most destinations.
International Shipping: Global fulfillment from our nearest warehouse with tracking provided upon dispatch.
Return & Guarantee Policy
Return Policy: Defective or damaged item? Return it within 30 days for a full refund. Customer pays return shipping.
Technical Support: Need help with compatibility or setup? Contact our US-based FPV experts at (951) 592-5658 for free assistance.