GEPRC TAKER F722 BLS 80A 65A 60A V2 STACK BLS 4IN1 ESC 16MB Black Box Data Analyze Record Flight FPV Drone Data Plug Play Racing
- Free worldwide shipping
SPECIFICATIONS
Brand Name: NoEnName_Null
Hign-concerned Chemical: None
Is Electric: No battery
Origin: Mainland China
Material: Composite Material
Recommend Age: 14+y
RC Parts & Accs: STACK
For Vehicle Type: Helicopters
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: STACK
Remote Control Peripherals/Devices: ESC
Tool Supplies: Assembly Category
Quantity: 1 pcs
Model Number: GEPRC TAKER F722 BLS V2 STACK
Four-wheel Drive Attributes: STACK
Wheelbase: Screws
Notice! The specifications of each type are different, please look carefully
TAKER F722BLS 60A V2 STACK
Features
-
Use mainstream STM32F722 chip
-
Equipped with the latest 42688-P gyroscope
-
16M black box storage
-
Integrated LC filter
-
Upgrade type-C USB interface
-
Directly plugged into the D JI Air Unit
-
With TAKER H60_BLS 60A 4IN1 ESC, the flying feel is silky
-
Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
-
9V@2.5A + 5V@3A dual independent BEC
Specifications
GEP-F722-HD v2 Flight Controller
-
MCU: STM32F722
-
IMU: ICM42688-P(SPI)
-
Air Unit Connection:Direct plugging into D JI Air Unit
-
Black Box: 16M onboard
-
USB Connector: Type-C
-
OSD: BetaFlight OSD w/ AT7456E chip
-
BEC: 5V@3A,9V@2.5A dual BEC
-
Firmware Target: GEPRCF722
-
Size: 36.85x36.85mm, hole 30.5x30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
-
Input Voltage: 3-6S LiPo
-
UART:5
-
Power Filter: Integrated LC filter
-
Weight: 8.1g
TAKER H60_BLS 60A 4IN1 ESC
-
Input Voltage: 3-6S Lipo
-
Galvanometer: Support
-
Continuous Current: 60A
-
Burst Current: 65A(5 second)
-
Support Protocol: Dshot 150/300/600
-
Size: 42x45.7mm,hole30.5x30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
-
Weight:14.9g
-
Target: B_X_30
Includes
1 x Flight Controller
1 x ESC
1 x Capacitor
1 x D JI Air Unit Adapter Cable
1 x Flight Controller Adapter Cable
1 x XT60 Power cable
4 x M3*30 Screws
4 x M3*25 Screws
8 x Nylon nuts
8 x Silicone grommets
2 x sh1.0 4pinsilicone cable
1 x Camera connection cable
TAKER F722BLS 65A V2 STACK
Features
-
Uses the mainstream STM32F722 chip
-
Equipped with the latest 42688-P gyroscope
-
16M onboard black box storage
-
Integrated LC filter
-
Upgraded Type-C USB interface
-
Directly plugs into the D JI Air Unit
-
Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC, providing a smooth flying experience
-
Simple and efficient installation method with shock absorbers for stable gyroscope performance
-
Dual independent BECs: 9V@2.5A and 5V@3A
Specifications
GEP-F722-HD v2 Flight Controller
-
MCU: STM32F722
-
IMU: ICM42688-P(SPI)
-
Air Unit Connection:Direct plugging into D JI Air Unit
-
Black Box: 16M onboard
-
USB Interface: Type-C
-
Barometer: supported
-
OSD: BetaFlight OSD w/ AT7456E chip
-
BEC: 5V@3A,9V@2.5A dual BEC
-
Firmware Target: GEPRCF722
-
Dimension: 36.85x36.85mm, mounting hole size 30.5x30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
-
Input Voltage: 3-6S LiPo
-
UART: 5
-
Power Filter: Integrated LC filter
-
Weight: 8.1g
TAKER H65_8S_BLS 65A 4IN1 ESC
-
Input Voltage: 3-8S Lipo
-
Ammeter: Supported
-
Continuous Current：65A
-
Burst Current：70A（5 seconds）
-
Support Protocol: Dshot 150/300/600
-
Dimension：42x45.7mm,mounting hole size30.5x30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
-
Weight: 14.9g
-
Firmware Target: B_X_30
Includes
1 x FC board
1 x ESC board
1 x Capacitor
1 x D JI Air Unit adapter cable
1 x Flight controller adapter cable
1 x XT60 power cable
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts
8 x Silicone anti-shake pads
2 x sh1.0 4pin silicone cable
1 x Camera connection cable
TAKER F722BLS 80A V2 STACK
Features
-
Use mainstream STM32F722 chip
-
Equipped with the latest 42688-P gyroscope
-
16M black box storage
-
Integrated LC filter
-
Upgrade type-C USB interface
-
Directly plugged into the D JI Air Unit
-
With TAKER H80_BLS 80A 4IN1 ESC, Dual MOS, high current, silky flight
-
Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
-
9V@2.5A + 5V@3A dual independent BEC
Specifications
GEP-F722-HD v2 Flight Controller
-
MCU:STM32F722
-
IMU:ICM42688-P(SPI)
-
Air Unit Connection:Direct plugging into D JI Air Unit
-
Black Box:16M onboard
-
USB Interface:Type-C
-
Barometer: support
-
OSD:BetaFlight OSD w/ AT7456E chip
-
BEC:5V@3A,9V@2.5A dual BEC
-
Firmware Target:GEPRCF722
-
Size:36.85x36.85mm, hole 30.5x30.5mm,φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
-
Input Voltage:3-6S LiPo
-
UART:5
-
Power Filter:Integrated LC filter
-
Weight:8.1g
TAKER H80_BLS 80A 4IN1 ESC
-
Input Voltage: 3-6S Lipo
-
Ammeter: Support
-
Continue Current:80A
-
Burst Current:85A(5 second)
-
Support Protocol: Dshot 150/300/600
-
Size:56.3*61.1mm,hole30.5x30.5mm,φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.
-
Weight: 28.1g
-
Target: B_X_30
Includes
1 x Flight Controller
1 x ESC
1 x Capacitor
1 x D JI Air Unit Adapter Cable
1 x Flight Controller Adapter Cable
1 x XT60 Power cable
4 x M3*30 Screws
4 x M3*25 Screws
8 x Nylon nuts
8 x Silicone grommets
2 x sh1.0 4pinsilicone cable
1 x Camera connection cable
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
USD