Description :
Compatible with DJI MINI 3 PRO only
In Stock Fast Ship
Gimbal Motor Test Tool :
1, only test connection and disconnection of the dji mini 3 / mini 3 pro yaw/roll/pitch motor .
2, It can use to test the HALL , COIL
3, If you test the individually motors , the motor must have the magnet ring.
4, You can connect the whole gimbal to the ESC connector to test gimbal motors also .
5, Rotate the motor , HALL light flashing is normal , Coil light on is normal .
Empty Gimbal :
It is Used , removed from other drone , in very good condition . If you replaced the gimbal , your drone will lose calibration , please make sure you can calibrate it by special firmware before order . Thank you .
Gimbal Camera :
It is not new , removed from new drone , just like new . If you replace the gimbal camera , your drone will lose calibration .
Please make sure you can calibrate it by special firmware before order . Thank you .
Camera Chip Module :
It is removed from new drone , 100% working .
7 in 1 Flex Cable:
This is original new 7 in 1 cable , 100% working well .
Gimbal PTZ Cable :
All were tested before shipping , working well
PTZ Cable Test Tool:
1, only test connection and disconnection of cable
2, Please use tweezer to remove the cable carefully , violent disassembly may destroy the port . Thank you !
Used Roll Motor:
Gimbal Yaw Motor :
It is used motor , in very good condition , all tested before shipping .
Gimbal Pitch Motor:
It is used motor , in very good condition , all tested before shipping .
Used Gimbal Axle Bearing:
Yaw Arm with 1 Motor :
This is used Yaw arm with 1 motor , in good condition
Yaw Arm Cover :
Original and Brand new
Gimbal Roll Arm :
Original and New from DJI
Gimbal Roll Arm Cover :
Original and New Cover
Cover 3 :