SpeedyBee Adapter 3 Built-in Bluetooth and Blackbox Downloader
- Free worldwide shipping
- In stock, ready to ship
- Backordered, shipping soon
Six Selling Points:
1. Wireless Blackbox Analyzer(If you have a FC with black box function, you can download the black box data of the flight controller through Adapter3 to Speedybee APP for analysis)
2. Wireless Firmware Flasher/Configurator
3. Wireless ESC flasher
4. 30W Fast USB Charger
5. 1S-6S Lipo Checker
6. Compatible with IOS & Android
your mobile FPV companion
your flight controller anytime, anywhere. Or flash the
latest version of Betaflight/Emuflight/INAV in just
2 minutes before your flight session.
The choice is yours.
Analyzing Blackbox data has
never been easier
quad to the SpeedyBee mobile app and analyze your
Blackbox data* in just 1.5 minutes after a flight.
Get the most out of your practice sessions now.
Configure your BLHeli_S ESCs
wherever you want
Why stop at flight controller? Change your BLHeli_S ESCs
setting or
update the firmware anytime, anywhere. Broken
motor? Solder it up, take your smartphone out, and configure
your motor direction
wirelessly with the latest SpeedyBee app
- now supporting BLHeli_32 and BLHeli_S ESCs.
Powerful 30W power banks
charge your mobile phone* and tablets when you
need them the most. Supports mainstream
QC3.0/AFC/Apple 2.4A (iPhone 6s and above)
and other fast charging protocols with charging
power up to 30W. Complete with over-current
protection, short-circuit protection and
over-temperature protection to protect
your gadgets from unwanted accidents.
Worry not
immediately show your battery voltage and the
remaining power with a specific color code*.
The built-in beeper will alert you if the remaining
power is less than 40% to help extend your
battery lifespan.
Why not both?
with MicroUSB 2.0 and USB 3.0 Type C connector
on each end. No more worries about connector
compatibility regardless of what flight controller
you are using in your build.
WiFi + Bluetooth =
the best of both worlds
your firmware configurator,
or switch to Wi-Fi to flash
firmware or download
Blackbox data at a
higher speed.
And all you need
is just one LiPo
"Access the configurator function using any LiPo
batteries available to
you. Supports all 1S - 6S LiPo
with PH2.0 or XT60 connectors. Plug in
that
beefy 6S 1500mah, or that tiny 1S Whoop battery
(minimum
voltage 3.8V), to the
SpeedyBee Adapter 3
you are ready to
access
the
configurator."
Note:When using a BT2.0 battery to power the Adapter3 via the PH2.0 port, please ensure the polarity is correct( Left for- and Right for +)
SpeedyBee Adapter 3 VS SpeedyBee Adapter 2
1 x Manual Card
Parameters
Product Name |
SpeedyBee Adapter 3 |
Power Input Voltage Range |
1-6S(3.8V+ for 1S) |
Power Input Connector |
XT60-Male, PH2.0 male |
Required Mobile Device System Version |
Android 7.0+ | iOS 12.0+ |
Supported SpeedyBee App Version |
V1.6.1 + for iOS | V1.5.6+ for Android |
Maximum Output Current for flight controllers |
700mA @5V |
Fast Charging Output interface |
USB A Port |
Minimum Input Voltage for Charging output |
7.4V(2S LiPo) |
Supported Fast Charging Protocol |
• QC3.0/QC2.0 |
Max Fast Charging Current |
3.5A |
Max Fast Charging Power |
30W |
Case Material |
ABS + PC |
Liquid Silicone Cable Length |
12.4cm |
Dimension(Main Body) |
24.8*21.8*53.6mm |
Net Weight |
35g |
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.