T-Motor 4-in-1 Brushless ESC | Velox V50A & P60A V2 Options
- Free US shipping on orders $100+
- In stock, ready to ship
- Backordered, shipping soon
PayPal — Same-Day Processing
Fastest shipping with same-day processing & Buyer Protection. All credit cards accepted at checkout through Shop Pay (installments available).
Save 10% at Checkout
Use code SAVE10 for 10% off your order
- Secure Checkout
- 30-Day Defect/Damage Returns
- Fast & Reliable Shipping
T-Motor Four-Channel Motor Control
Choose a T-Motor Velox V50A or P60A V2 4-in-1 ESC for a compatible brushless FPV build. Each selection is an electronic speed-controller board, not a flight-controller-and-ESC stack.
Before your next build session, match the selected board to your battery, motor load and frame layout. Four motor-control channels on one board help organize the installation, while careful pinout and clearance checks keep the build specific to your hardware.
Choose Your ESC
- V50A ESC: The supplied text lists a Velox V50A 32-bit 4-in-1 ESC with 3–6S input, 50A continuous current and 55A burst current. Confirm rating conditions and cooling requirements.
- P60A V2 ESC: Separate P60A V2 board option. Do not apply V50A dimensions, current limits, firmware target or accessory list to this model. Confirm its revision-specific specifications before purchase.
Both options carry a No plug selection. This label conflicts with the V50A accessory list's XT60 cable. Confirm whether the selected package includes a loose connector/cable, excludes it, or simply has no preinstalled connector. Do not assume plug-and-play installation.
V50A Specifications
- Input: Listed 3–6S LiPo.
- Continuous current: Listed 50A.
- Burst current: Listed 55A; duration and test conditions are not supplied.
- Dimensions: Listed 45.4 × 43.8 × 8mm.
- Mounting: Source lists 30 × 30mm. Confirm exact hole-center spacing and mounting hardware rather than assuming a standard pattern.
- Weight: Listed 18.5g.
- Firmware identifier: Listed TMOTOR T4 02; verify the actual board and correct target before flashing.
Firmware and Compatibility
The original listing references BLHeli_32, but exact firmware support should be checked against the selected board revision. DShot2400 support is not established in the supplied text and is not promised. Confirm supported control protocols, telemetry and firmware tools before configuration.
Match motor-and-propeller current, battery voltage, cooling and capacitor requirements to the selected model. Frame-size tags do not establish fit or electrical compatibility. A connector that physically fits may still have a different pinout; check each signal and power connection against both boards' documentation.
Perfect For
Experienced FPV builders selecting or replacing a four-channel brushless ESC and able to verify wiring, power-system requirements and mechanical fit.
What's Included
V50A source package list:
- 1 × T-Motor Velox V50A 32-bit 4-in-1 ESC.
- 1 × 8P/10P exchangeable wiring harness.
- 1 × 8P/8P silicone wiring harness.
- 1 × listed XT60 14AWG 145mm cable, subject to confirmation against the No plug option.
- 4 × shock-absorbing washers.
- 1 × capacitor.
P60A V2: One selected ESC board; confirm the model-specific accessory pack. The supplied text does not itemize it. A flight controller, motors, battery and frame are not established as included with either option.
Installation and Safety
- Remove propellers before wiring checks and motor tests.
- Verify polarity, input voltage and FC-to-ESC pinout before applying power.
- Use suitable wires, soldering, insulation and the specified capacitor.
- Confirm the exact firmware target before any firmware change.
- Check motor order, direction, arming and failsafe behavior before flight.
- Keep current and temperature within the selected board's documented limits.
For the No plug selection, mounting dimensions or P60A V2 specifications, contact sales@thedroneflight.com before ordering.
Shipping Policy
Estimated Delivery: Orders ship within 24–48 hours with full end-to-end tracking. Transit times typically take under 13 days (6–12 business days) to most destinations.
International Shipping: Global fulfillment from our nearest warehouse with tracking provided upon dispatch.
Return & Guarantee Policy
Return Policy: Defective or damaged item? Return it within 30 days for a full refund. Customer pays return shipping.
Technical Support: Need help with compatibility or setup? Contact our US-based FPV experts at (951) 592-5658 for free assistance.
